How to Accelerate Switch Games - PC Version

1. Connection method between Switch and PC

It is recommended that both Switch and PC be wired to the same router(do not use optical modem or set-top box as routers, as they may not be able to connect to the network), and Thor Accelerator needs to be installed on the PC computer..

2. PC settings

1. Download and install the latest version of Thunder Accelerator;;
2. Simply search for "Switch" to see all Switch games;
3. Select the corresponding game and click "one click acceleration"; After successful acceleration, relevant prompts will be given. Please follow these prompts to continue with the subsequent Switch settings.

III. Switch settings

1. Enter the network settings page: Settings → Internet → Internet settings;
2. Click to select the WiFi corresponding to your router;
3. Click on "Change Settings";
4. Change the IP address, subnet mask, gateway, and DNS to the configuration provided by the Thunder Accelerator mentioned above (note: if the parameter number is less than three digits, 0 needs to be added in front);
5. After completing the settings, return to the network test. If it displays normally, it means the connection is successful.

4. Common Problems and Solutions

(1) Common Problems

• The host and computer should be on the same local area network and try to connect to the same WiFi as much as possible; Do not mix 2.4G WiFi, 5G WiFi, and wired networks; Most routers have isolation functions, and it is recommended not to use the operator's optical modem for direct access.
• Some operators' LAN devices under optical modem cannot access each other, resulting in cascading failure.

(2) Solution

Let the host first automatically obtain the IP address, and then enter ping [IP obtained by the host] through the command prompt on the computer to test connectivity; If the test fails, it is recommended to check the router configuration items (or try replacing the router).